Axxess-interface ASWC Bedienungsanleitung PDF herunterladen (Seite 11)

Note: Not every radio will have all the possible SWC commands on

the steering wheel. Aftermarket radios that do not have Bluetooth

will not recognize the PTT (Push To Talk) or “On/”off” Hook”

commands; however those buttons can be manually programmed to

do other commands in some cases. Please refer to the radio owner’s

manual or wireless remote for specific commands that the radio will

recognize.

1) Completeconnectionstothevehicleandtotheaftermarketradio,

makesurethe3.5mmconnectorisconnected.

IfthisisthefirsttimetheASWCisbeinginstalledinavehicle:

2) Turntheignitionon;theLEDwillstartflashingrapidly.

3) After10secondstheASWCwillgointotheLEDfeedbackmode.

AftertheseriesofLEDflashestheLEDwillstayinaslowconstant

flashstate.Gotostep4.

--- Or ---

IftheASWChasbeeninavehiclebefore:

2) Pressandholdtheresetbuttondownformorethen10seconds.

3) Afterthe10secondstheLEDwillbeginaslowconstantflash.

4) Atthispointpressandholdthe“VolumeUp”buttononthesteering

wheelfor7secondsuntiltheLEDgoessolidred.Nowreleasethe

“VolumeUp”buttonandtheLEDgoes“off”.“VolumeUp”hasnow

beenprogrammed.

Section 3: Troubleshooting

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Keine Kommentare

Axxess-interface ASWC Bedienungsanleitung Seite 11